“Die press quality scoring, perforating and folding in one fast operation, on your folding machine”
Some folding machines can score with limited quality and some can’t. Moll’s Perf-N-Crease, with the help of your Moll machine or paper folder to feed it, can produce the high quality of a die press score. This mobile unit can roll up to, and adjust to most makes, models, or sizes of folding machines – parallel or 8 page section, before or after the fold.
How it works
The Perf-N-Crease has a register that reaches into the folder. All you do is raise the #1 and #3 fold plates, letting the sheet deliver into the Perf-N-Crease from the #1 fold roller, without going through all the fold rollers and deflectors. Then you can deliver the sheets flat onto the stacker or onto the 8-page section to finish folding. The Perf-N-Crease can also be adjusted down to the slitter shafts to accept folded sheets from the folder.
- 30” or 36” wide format
- Dual shaft system so you can hit the same crease – hit the crease in the first shaft and then harder in the second shaft to gradually crease digitally printed stocks
- Dual register – keeps sheet in side guide on long narrow sheets
- Can run in line with Moll machines or any brand of paper folders
|Material||Cover Stock Paper, Heavy Board||Cover Stock Paper, Heavy Board|
|Paper weight||70lb Cover to 28pt Stocks||140–500 g/m²|
|Minimum product size (WxL)||5.5 x 5.5 inches”||139 x 139 mm|
|Maximum product size (WxL)||30 x 30 or 36 x 36 inches||720 x 720 or 920 x 920 mm|
|Maximum linear speed||425ft/min||130m/min|
|Power connection||220V, 3PH, 30AMP, 60 HZ||400V, 3PH, 30AMP, 50 HZ|
|Compressed air connection||90 PSI||.7 mPa|