Pile PT System
The Moll Pile PT paper folder is similar to our Bottom Friction Feeder. This Folder Gluer machine is a condensed folding and taping system that feeds from a pile feeder with a non-marking air wheel to ensure your coated stocks don’t scratch or mark. Through the 51 inch long in-feed section the machine allows you to perform such things as tab forming, folding, gluing, taping, or inserting. Other Moll module attachments can be added at anytime to length and perform more functions at anytime in the future!
Features
- Economical footprint
- Pile fed – anti marking
- Quick set up
- Belt drive
- Etched railing for quick change overs
- Built in sheet spacer, batch counter, DC controls and more
- Equipped with two and three inch wide drive belts on top of removable filler pans
- Dual pump system
- Ability to bump-n-turn a sheet
Industries/Consumers served
POP, pharmaceutical, accounting/financial institutions, commercial print, and more!
Specifications
| Imperial | Metric | |
| Material | Cover Stock Paper, Heavy Board | Cover Stock Paper, Heavy Board |
| Paper weight | 70lb Cover to 28pt Stocks | 140–500 g/m² |
| Minimum product size (WxL) | 5.5 x 5.5 inches | 139 x 139 mm |
| Maximum product size (WxL) | 30 x 30 inches | 762 x 762 mm |
| Maximum linear speed | 425ft/min | 130m/min |
| Power connection | 220V, 3PH, 30AMP, 60 HZ | 400V, 3PH, 30AMP, 50 HZ |
| Compressed air connection | 90 PSI | .7 mPa |
Options
- Double Sided Tape Head
- Tear Tape Applicator
- Room key card kit
- Vacuum System
- Drop in registration
- Tip on machine
- Tipper plate with air blast (for folding the pockets on folders)
- Cold Glue System
- Hot Glue System
- Moll Versafold
- Moll Perf N Crease
- Capacity Forming Attachment
